Skip to content
All guides

Guides for depot managers

Vehicle intake process for an AV fleet depot: from the gate to a first status

Every car that comes through the gate, new, back from a body shop, towed in or transferred, gets the same five steps before it parks: triage, identity, condition, recalls and a first status. A damaged EV never gets past the first one.

By XoomPark Editorial Team ·

Intake is the fixed sequence that takes an arriving car from the gate to its first status: triage it for damage, capture its identity, record its condition, check it for open recalls, then route it. The order matters most at step one. NHTSA's guidance for vehicle storage facilities says not to store a severely damaged vehicle with a lithium-ion battery inside a structure or within 50 feet of any structure, vehicle or combustibles.1 A towed-in car that skips triage and parks in the charging row puts every car around it at risk.
Five intake steps for an AV fleet depot. The sequence and the records are our method, not a published standard; the last column shows where a step leans on a public rule.
StepWhat happensWhat gets recordedRule behind it
1. TriageDecide at the gate whether the car is damaged, flooded or showing battery warningsArrival type, damage yes or no, where it was parkedDamaged EVs stay 50 feet clear1
2. IdentityScan the VIN and match it to the car you expectedVIN, plate, model year, keys received17 characters with a check digit4
3. ConditionPhotograph the car and log damage, warning lights and charge levelPhotos, damage notes, odometer, state of chargeOur assumption
4. RecallsRun the VIN through NHTSA's recall lookupOpen recalls, date checkedUnrepaired recalls only5
5. First statusGive the car one status and send it to that laneStatus, lane, owner, timeOur availability statuses

Which arrivals go through intake?

All of them, because the gate cannot tell a healthy car from a damaged one by its paperwork. Our working list, an assumption and not a standard, has four arrival types: new deliveries from the maker or a dealer, cars back from a vendor or body shop, tow-ins after an incident or a breakdown, and transfers from another depot. Each gets the same five steps. What changes is what you expect to find.
  • New deliveries: the VIN is new to your system and has never been checked for recalls. Expect clean condition, missing data.
  • Vendor and body shop returns: the work order says what was fixed. Check that it was, and that nothing new was added.
  • Tow-ins: assume damage until triage says otherwise. These are the cars step one exists for.
  • Transfers: the car has history in another depot's system. Pull it rather than starting from zero.

A car that leaves for an hour and comes back, such as one returning from a trip, does not need intake. It needs the turnaround: charge, clean and the pre-service inspection. Intake is for cars that were out of your hands.

Gate triage: where a damaged or flooded EV parks

Outside, apart and watched. NHTSA's interim guidance for towing operators and vehicle storage facilities says to keep a severely damaged lithium-ion vehicle out of structures and 50 feet from any structure, vehicle or combustibles, keep the passenger and cargo compartments ventilated, and maintain clear access to it for monitoring and emergency response.1 It also says to keep inspecting the car before placing it and while it is in the storage area, and to call 911 at leaking fluids, sparks, smoke, flames, or gurgling or bubbling sounds from the battery.1

The reason for the distance is time. NHTSA says to always assume the high-voltage battery and its components are energized and fully charged, and warns of a potential for delayed fire with damaged lithium-ion batteries.1 The National Transportation Safety Board found that the battery fires it investigated reignited multiple times, even days after a crash, and that a Chevrolet Volt reignited 3 weeks after a crash test and damaged four nearby vehicles.2

Most depots cannot give a car a 50-foot circle, and the NTSB said so: storing an EV with a damaged battery inside the recommended 50-foot clear area may be infeasible at tow or storage yards.2 It points to the alternative in SAE J2990: a barrier of earth, steel, concrete or solid masonry around the vehicle.2 Decide which one your yard uses before the first tow-in arrives, and mark the spot. That is our assumption, but it is the step depots skip.

  • Damage that sends a car to the isolation spot, in our method: any crash damage to the floor or underbody, any battery warning on the dash, any water above the floor, and any car whose history you cannot get.
  • Flooded cars count. NHTSA says a high-voltage battery in a flooded vehicle may have high voltage and short circuits that can shock and cause fires.1 The Alternative Fuels Data Center lists water intrusion, especially salt water, and hurricane flooding among the causes of battery fires.3
  • Call the maker. NHTSA says to notify an authorized service center or the manufacturer's representative as soon as possible, because there may be additional steps to secure and discharge the battery.1
  • Have the guide on file before the car arrives. The Alternative Fuels Data Center tells fleet managers to write a fleet safety plan before or upon delivery and to ask the maker for an ISO 17840 compatible Emergency Response Guide posted on the NFPA website.3

Identity: scanning the VIN and checking its check digit

Scan the VIN at the car and match it to the car you were expecting before anything else is logged. Federal rules require every VIN to be 17 characters, with a check digit in position nine whose stated purpose is to provide a means for verifying the accuracy of any VIN transcription.4 A scanner or system that validates the check digit catches most single typos before they reach your records.

The check works like this, using the sample in 49 CFR 565.15. Each character gets a value (letters are converted by a table), each value is multiplied by a weight for its position, and the products are added and divided by 11. For the regulation's sample VIN, 1G4AH59H?5G118341, the products add up to 411, and 411 divided by 11 is 37 with 4 left over, so the check digit is 4.4 A remainder of 10 is written as X.4 Change one character and the sum almost always stops matching.

Position 10 is the model year. For passenger cars it reads T for 2026 and V for 2027.4 It is a quick check that the car on the truck is the one on the delivery note. Record the VIN, the plate, the model year and every key or key card received, in one record, before the car moves again.

The condition record: photos, warning lights and charge

Photograph the car from the same angles every time and write down what you see in plain words. The record exists for one moment: the day someone asks whether a scratch came in with the car or happened in your yard. This step is our method, an assumption and not a published standard.
  • Photos: four corners, each side, the roof if you can reach it, the interior front and rear, the dash with the car on.
  • Damage in words: "scrape, right rear bumper, 10 cm", not "minor damage".
  • Warning lights: which ones are on, photographed, before anyone clears them.
  • Odometer and state of charge, so you know what the delivery or tow added.
  • Anything missing: charging cable, floor mats, first aid kit, the items your release list expects.
  • For vendor returns, the work order, attached to the record, with what it says was done.

The recall check at intake

Run every arriving VIN through NHTSA's recall lookup before the car gets its first status. A VIN or plate search shows whether a specific vehicle has an unrepaired recall, and a clean car shows "0 unrepaired recalls associated with this VIN".5 The same page lets you search up to 100 VINs at once,5 which covers a delivery truck in one pass.

Know the gaps. NHTSA says the search will not show recalls already repaired, some recently announced recalls for which not all VINs have been identified, recalls more than 15 years old unless the maker offers more, recalls by small manufacturers, non-safety campaigns and international vehicles.5 VINs are added continuously, so it tells you to check regularly.5 Intake is the first check, not the last.

If your cars are rented to the public, the law sets a clock. A rental company that gets a recall notice for a covered vehicle may not rent it until it has been remedied, and must comply within 24 hours of receiving the notice, or 48 hours if the notice covers more than 5,000 vehicles in its fleet.6 Our assumption for other depots: a car with an open recall gets a hold status at intake, never an available one.

Routing: the first status and the lane it goes to

End intake by giving the car one status and moving it to that lane: isolation, maintenance, held, charging or cleaning. Use the same statuses as your availability report, so a car that has just arrived is counted the moment it is through the gate. An arriving car never goes straight to available; it reaches that only through the readiness release.
Where an arriving car goes after intake. The routing is our method, an assumption and not a standard.
What intake foundFirst statusLane
Damage, flood or battery warningHeld out of serviceIsolation spot, 50 feet clear or behind a barrier12
Open recallHeld out of serviceHold row until remedied5
Defect with no battery riskMaintenanceBay queue, with the condition record attached
Clean, low chargeChargingCharging row
Clean, chargedCleaning or inspectionTurnaround, then the readiness release

An example, with made-up numbers to show the routing. Fourteen cars arrive in a day: two tow-ins go to the isolation spot, one new delivery shows an open recall and goes to the hold row, three go to the maintenance queue, and eight need charge. The routes add back to 14, which is the check: no car is left without a lane. When stalls are what slows the charging lane, XoomPark arranges AV fleet charging at existing stations in hours their stalls sit unused, never blocks a station's regular customers and never pushes a station past its monthly peak.

When a written intake process is the wrong tool

  • The car is on fire or making noise. Intake stops; NHTSA says call 911 at leaking fluids, sparks, smoke, flames, or gurgling or bubbling from the battery.1
  • The question is whether the driving system works. That call belongs to the vehicle's maker and its trained staff. Intake records that a car arrived and where it went, nothing more.
  • You take in one or two cars a month. Our assumption: a single written checklist taped to the gate does the job, and a full workflow is overhead.
  • You are tempted to skip triage for cars from a trusted body shop. Do not. The shop fixed what was on the work order; triage asks whether anything else is wrong.

Questions depot managers ask

What is a vehicle intake process?

The fixed sequence that takes an arriving car from the gate to its first status. In the method here: triage, identity, condition, recall check, first status.

How far from other cars should a damaged EV be parked?

NHTSA says not inside a structure and not within 50 feet of any structure, vehicle or combustibles.1 Where that is not possible, the NTSB points to the SAE J2990 alternative of a barrier of earth, steel, concrete or solid masonry.2

Why check the VIN check digit?

Position nine of every VIN exists to verify the accuracy of a VIN transcription.4 If the digit does not match, the VIN was typed or read wrong, and every record built on it would be wrong too.

Can a car with an open recall be put into service?

For rental companies, no: a covered rental vehicle may not be rented until the recall is remedied.6 For other depots, our assumption is the same rule, applied as a hold status at intake.

Does the recall lookup catch every recall?

No. NHTSA says it leaves out repaired recalls, some recently announced recalls, recalls over 15 years old, small manufacturers, non-safety campaigns and international vehicles, and it says to check regularly.5

Who should handle a towed-in EV with a damaged battery?

Trained staff and the maker. NHTSA says to notify an authorized service center or the manufacturer's representative as soon as possible.1 The Alternative Fuels Data Center tells fleet managers to ask the maker for an ISO 17840 compatible Emergency Response Guide in advance.3

Authorship

Written by XoomPark Editorial Team in collaboration with Claude Opus 5.5

Role breakdown: Topic selection and publishing by XoomPark Editorial Team; research, source checks against primary sources and draft prose by Claude Opus 5.5.